Operation Guide

- 18 -
III. Connect the boundary wire to the Fence
Transmitter: Strip the ends of the Boundary
Wire and Insert each into the Boundary Wire
Terminals of Fence Transmitter to make a
complete loop.
Plug the Power Adaptor into the Power Jack of
the Fence Transmitter and AC power supply
outlet.
Power on the Fence transmitter , the Power
Light is on
Important: If the Boundary Wire connection is
OK, the Loop Indicator Light will be on after you
power on Fence Transmitter. Otherwise, the
Fence Transmitter will beep to warn of a break
in the loop.
IV. Prepare the Receiver Collar: Your
Receiver Collar comes with short Contact
Prongs installed. Use the long Contact Prong for
pets with long or thick hair, and the short