Operation Guide

- 17 -
power shortages and proper function, install
the Fence Transmitter inside a building or
covered area away from the elements. Place the
Fence Transmitter in a dry area where the
temperature will not fall below freezing and at
least three feet from any major appliance.
II. Layout the system and position the
boundary wire: Design a Boundary Wire
layout that is suitable for your yard. The
Boundary Wire must start at the Fence
Transmitter and make a continuous loop back.
Important: Running the Boundary Wire parallel
to or within five feet of electrical wires,
neighboring containment systems, telephone
wires, television or antenna cables, or satellite
dishes will cause an inconsistent signal. If you
must cross any of these, do so at 90-degree
angles.