Operation Guide

- 15 -
Receiver Collar
NOTE: CHARGE RECEIVER BEFORE FIRST USE. IF IT
DOESN
’ T CHARGE CONTACT US IMMEDIATELY
On/Off Button and Dual/Single Mode Selector
Press and hold for 4 seconds to turn the collar on; two beeps will sound. Press
and hold on 4 seconds again. 1 long tone will sound and the green LED light will
stop flashing and turn off.
The collar has 2 modes:
Single mode: Fence function only, Green LED light flashes 2 times per 5 seconds
Dual mode: Fence function and remote function both, Green LED light flashes 1
time per 5 seconds
Turn the collar off when not in use to conserve battery
Contact Prong
Choose short or long prong to
match the dog’s coat type.
LED Light
Indicate the working status,
low battery ,charging status.
DC Jack Cover
Open the Rubber Cover
and insert the adaptor plug
into DC Jack to charge.
High Light Led
1
st
Dog Light = White
2
nd
Dog Light = Red