Operation Guide

- 47 -
Problem#9:ThePowerLightandtheLoop
IndicatorLightsareoff.

 Makesurethebothendsofthe
BoundaryWirearepluggedintothe
FenceTransmitterBoundaryWire
Terminals.
 PerformaTest.Useashortsectionof
BoundaryWiretoplugintobothFence
TransmitterBoundaryWireTerminals. 
Ifthelightsturnon,thismeansyou
haveabreakinyourperimeterof
boundarywire,ifthelightsstilldonot
glow,youmayhaveafaultyFence
Transmitter.PleaseContactus.

Warning：
Thisdevicecomplieswithpart15oftheFCC
Rules.Operationissubjecttothefollowing
twoconditions:(1)thisdevicemaynotcause
harmfulinterference,and