Operation Guide
- 39 -
functionboth,Greenledflash1timeper5
seconds
It is strongly recommended only to use Dual Mode
when you are using the collar for both pet
containment and remote training purposes
simultaneously.
When the system is being used for containment
purposes only, it is strongly recommended to
switch the collar to Single Mode only to
substantially increase the battery life of the collar.
To switch on/off the Single Mode and Dual mode
do the following:
1) Press and hold on 2 seconds when receive collar
is on , the Red LED light on then release at once .
The green LED will flash 2 times of 5 seconds. The
fence function is on, the remote function is off. It is
Single mode now .
2) Press and hold on 2 seconds again, the Red LED
light on then release at once . The green LED will
flash 1 time of 5 seconds. The fence function and
remote function are both on .Now it is Dual mode .