Operation Guide

- 20 -
V.Settheboundarywidthandtestthe
ReceiverCollar:Rotatetheknobofthe
BoundaryControlSwitchtoadjustthewidthof
theWarningZoneandalsotheVibrateand
StaticCorrectionZone.SettheBoundarywidth
aswideaspossibletogiveyourpetthewidest
WarningZoneandCorrectionZonepossible. 

TotesttheReceiverCollar,makesurethe
collarisfirstpoweredon.HoldtheReceiver
Collaratyourpet’snecklevelandwalktoward
theBoundaryWirewithContactProng
pointingupuntiltheReceiverCollarbeeps. 
IftheReceiverCollardoesnotbeepatthe
desiredrange,simplyturntheBoundary
ControlSwitchKnobclockwisetoincreasethe
BoundaryWidthorcounterclockwiseto
decreasetheBoundaryWidth.Repeatthis
activityasneededuntiltheReceiverCollar
beepsatthedesireddistancefromthe
Boundarywire.