Operation Guide

- 19 -
III.ConnecttheboundarywiretotheFence
Transmitter:StriptheendsoftheBoundary
WireandInserteachintotheBoundaryWire
TerminalsofFenceTransmittertomakea
completeloop.PlugthePowerAdaptorintothe
PowerJackoftheFenceTransmitterandAC
powersupplyoutlet.

Important:IftheBoundaryWireconnectionis
OK,theLoopIndicatorLightwillturnonafter
youpluginthepowersupply.Otherwise,the
FenceTransmitterwillbeeptowarnofabreak
intheloop.

IV.PreparetheReceiverCollar:Your
ReceiverCollarcomeswithshortContact
Prongsinstalled.UsethelongContactProngfor
petswithlongorthickhair,andtheshort
prongforpetswithshortercoatsofhair.Then
simplypresstheOn/Offbuttononthe
ReceiverCollartoturnthecollaron.  