TOPFLYtech TLW2-12B Asset GPS Tracker User Manual 20210223
Thanks for your purchasing of the high-quality GPS tracker from TOPFLYtech. Please read this user manual carefully before installation and operation. Information in this manual is the property of TOPFLYtech. Changes to the specifications and features in this manual may be made by TOPFLYtech without prior notice. No part of this manual could be reproduced, copied, translated, transmitted, or published in any form or by any means without TOPFLYtech's prior written permission.
Contents 1. QUICK REFERENCE ..............................................................................................................................4 2. PRODUCT SPECIFICATIONS ..............................................................................................................4 3. STANDARD ACCESSORIES INTRODUCTION ................................................................................6 4. LED INDICATOR ...........................................................................
1. Quick Reference Intelligent Power Management To extend the battery life, we designed an intelligent power management algorithm. This algorithm allows the tracker working for long period when battery is low and disconnected from external power. Once the battery is charged back, the tracker will report as normal. This function is enabled in default. Customer can disable it by command. The detail working logic is: ⚫ ⚫ When the battery voltage value is down to 3.
NB1: Max. 32Kbps (DL), Max. 70Kbps (UL) EDGE: Max. 296Kbps (DL), Max. 236.8Kbps (UL) GPRS: Max. 107Kbps (DL), Max. 85.
3. Standard Accessories Introduction USB cable 4. Extension cable LED indicator Note: Indicator lights will go out automatically after the tracker turns on for 8 mins. 5. Installation Guide 5.1 SIM Card Pre-Installation Note 5.1.1 SIM card data service should be enabled. 5.1.2 If SIM card is locked via PIN, please unlock it first. 5.1.3 Ensure there is sufficient balance in the SIM card. 5.2 SIM card installation and tracker power switch 5.2.1 Open the tracker rear cover with the screwdriver.
5.3.2 Plug the extension cable to make it solid attached. 5.3.3 Tighten the cap on the extension cable until it can’t be turned any more. 5.3.4 With a big capacity internal battery, the device can be used without extension cable. Please make sure the tracker cap is tightened firmly to protect the pins. 5.4 Installation 5.4.1 Away from emission source such as all kinds of sensors, burglar alarm and other communication devices. 6. Quick Trouble Shooting 6.
. Optional Accessories List TA01 Fuel Supply Cut Relay(12V) TA11 Fuel Supply Cut Relay(24V) TA34 Ultrasound Fuel Sensor v2 TA12 BLE Tag TA20 External TPS Suite (BLE) TA22 Internal TPS Suite (BLE) TSTH1-B TSDT1-B 9. BLE 5.0 Wireless Temperature & Humidity Sensor BLE 5.0 Wireless Door & Temperature Sensor TSR1-B BLE 5.
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules.
