User Manual

Welcome to use V12 Smart Translator. We recommend you to read the
manual carefully before using the translator.
Before using the translator, please follow these steps:
1. Please check the accessories in the package first.
Package Content: 1*Translator 1*Charging cable 1*Manual
The initialization of the device may take some time, please wait for a moment.
2. Please try to make sure that you can use it in an environment with internet,
or you can use the offline translation function if there is no internet.
Product Features
1. Large capacity battery, long standby time;
2. This device supports wireless WiFi (2.4G) network and mobile hotspot
network;
3. 4.0 inch IPS high resolution touch screen;
4. Support multilingual translation, accurate translation and quick response;
5. Simple interface and simple operation;
WLAN
You need to connect to the wireless network after the device is turned on.
Configure the wireless network through the menu "Settings" – “WLAN”, turn on
the wireless network switch on the settings page, select the wireless network
you want to connect to, and enter the correct password to connect.
Charge
When the device is in low-power state, the battery icon on the Status Bar will
turn into an obvious low-power state as well. During the low-power state, some
function of the device may not work properly. When the battery power is lower
than the set standard, the device will automatically shut down, the device will
automatically shut down to protect the data. To boot up again require sufficient
charging.
When charging the device in the off state, the screen will display a large
battery charging sign, a battery percentage icon and an indicator light for about
8-10 seconds;
When charging the device in the power on state, the battery icon in the upper
right corner of the screen has "lightning" and green progress bar signs and
indicator light prompts;
After charging, the icon of full load battery capacity will be displayed.