User's Manual

9
-Turn the FM radio Knob to select the AM channel you want.
Antenna
For best FM reception, extend the wire antenna located at the back of
the unit.
Move it around until you get the best FM reception.
AUX-IN OPERATION
-Switch ON/OFF button to ON position.
-Set the Function Knob to the AUX position..
-Connect the two ends of the included Audio cable to the LINE IN jack
on the back of the speaker(white end into white slot, red end into red
slot), and the other end of the cable to the output jack on your mobile
phone or tablet etc.
BLUETOOTH FUNCTION OPERATION
-Switch ON/OFF button to ON position.
-Set the Function Knob to the BT (Bluetooth) position.
- The red BLUE will quickly flash in the LED screen.
- Keep the turntable and Bluetooth enable device within 3 feet of each
other during the pairing process.
- Set your Bluetooth enable device to search for Bluetooth devices.
- When the Bluetooth enable device finds the turntable, select
RETRO10E-BTH from the list of the found devices.
- If required, enter the password 0000. Select OK or Yes to pair the two
units.
- After a successful pairing, the red “BLUE” will solid in the LED screen.
USING THE CASSETTE PLAYER