User's Manual

ManualsBrandsSHENZHEN TONGKE ELECTRONICS ManualsAudio EquipmentTurntable

SAFETY PRECAUTIONS

* This product is designed for use in moderate climates. Do not use or

install this unit where it would be exposed to direct sunlight or in

extremely hot temperatures, or near a radiator, stove or appliance that

produces heat.

* Do not take this unit into the bathroom, or near a swimming pool. Do

not use it where it would expose to water, moisture, dripping or

splashing.

* No objects filled with liquids, such as vases, should be placed on the

product.

* No naked flame sources, such as candles, should be placed on the

product.

* If water gets inside the unit. Unplug the power cord from the supply

socket and consult your dealer.

* Do not handle the power cord with wet hands. To avoid electric shock,

NEVER touch any internal parts. Repairs/Servicing should be left too a

qualified service person.

* When connecting or disconnecting from the mains supply, hold the

plug, not the cord. Pulling the cord may damage it and could be

dangerous.

* Do not drop the unit, spill liquid into it or allow objects to fall in it.

* If the unit fails to operate, disconnect from the mains and consult a

qualified service person.

* When plugged in, a very small current will flow. To save electricity

and for safety when not using the unit for an extended period of time,

it is recommended that the product is completely disconnected at the

AC mains socket.

* Do not bend the cord sharply, pull or twist it.

* Do not modify the power cord in any manner.

* Do not insert any metallic object into the unit.

* Unplug the power cord when there is the possibility of lighting.

* In case of malfunction due to electrostatic discharge just reset the

product (reconnect of power source may be required) to resume

normal operation.

Summary of content (14 pages)

PAGE 1
SAFETY PRECAUTIONS * This product is designed for use in moderate climates. Do not use or install this unit where it would be exposed to direct sunlight or in extremely hot temperatures, or near a radiator, stove or appliance that produces heat. * Do not take this unit into the bathroom, or near a swimming pool. Do not use it where it would expose to water, moisture, dripping or splashing. * No objects filled with liquids, such as vases, should be placed on the product.
PAGE 2
We certify that the power supply is used as a device for disconnecting the power distribution network, which should stay easily accessible. POSITIONING THE UNIT * A minimum distance of 6 INCHES must be maintained to provide sufficient ventilation. * Allow adequate ventilation for the unit. Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table cloths, curtains etc. Do not stand it on a thick pile carpet, or install it in a place with poor air flow.
PAGE 3
SAFETY MECHANISM This unit incorporates a safety interlock mechanism which switches the laser beam on and off, so that when the disc holder is open, the laser beam stops automatically. This set employs an optical laser beam system in the CD mechanism designed with built-in safeguards. Do not attempt to disassemble. Exposure to this invisible laser light beam may be harmful a human eye. This is a Class 1 laser product.
PAGE 4
LOCATION OF CONTROLS 3
PAGE 5
FRONT VIEW 1. Turntable Cover 2. FM Radio Knob 3. Volume Knob; Power ON/OFF 4. Function Knob (CD/PH/FM/AUX/BT/TAPE) 5. PREV Button 6. Next Button 7. AM/FM Button 8. CD Open/Close Button 9. Stop Button 10. Play/Pause Button 11.LED Display 12. CD Door REAR VIEW 13. AUX input 22. AM/FM Antenna 14. DC IN port TOP VIEW 15. Turntable pickup 16. Tone Arm 17. Speed Control Switch 18. Tone Arm Lock 19. Control Perch 20. 45 RPM Adaptor 21. Turntable TAPE SIDE VIEW 23. Tape Eject/ Fast-Forward Button 24.
PAGE 6
LED DISPLAY PREPARATION FOR USE Carefully unpack the Main unit from its carton (do not attempt to connect anything at this stage). You should have the following items: Packing included 1. User Manual 2. Main Unit. 3. Adaptor 4.
PAGE 7
If any of these items are missing, consult your dealer. Keep any packaging in case you want to transport the main unit at some later date. Connections * Connect the Adaptor to the DC outlet. * Connect the AUX-IN cable to the R/L outlet. * Unwind the FM antenna. Adjusting the sound To adjust the sound, turn the Volume Knob located on the Left side of your system in any mode. USING THE CD PLAYER Loading CDs -Switch ON/OFF button to ON position. Set the Function Knob to the CD position.
PAGE 8
Playing CDs Press PLAY/PAUSE button to play/pause, when pause, LED screen will indicate II. - Press Stop Button, will stop playing. - To resume play, press the Play/Pause Button again. - Press the Play/Pause Button again. - Press the PREV/NEXT Button to enter into last/next songs. USING THE TURNTABLE - Switch ON/OFF button to ON position. Set the Function Knob to the PH (phonograph) position.. -Place the record on the turntable. -Select the speed of record: 33, 45, 78rpm according to vinyl to played.
PAGE 9
a. Place a screwdriver at the tip of the needle heads hell and push downwards in the direction shown in sketch “A” b. Remove the needle head shell by pulling it forwards and pushing downwards. Inserting the needle c. Hold the tip of the needle head shell and insert it by pressing in the direction illustrated by “B” d. Push the needle head shell upwards in the direction illustrated by “C” until the needle locks into the tip position.
PAGE 10
-Turn the FM radio Knob to select the AM channel you want. Antenna For best FM reception, extend the wire antenna located at the back of the unit. Move it around until you get the best FM reception. AUX-IN OPERATION -Switch ON/OFF button to ON position. -Set the Function Knob to the AUX position..
PAGE 11
-Switch ON/OFF button to ON position. -Set the Function Knob to the TAPE position. - Put the tape into the right of tape seat by your hand, then it can work. - Push the tape button of Grade1, it can go faster. When you push Grade2, The tape will come out. - When tape is finish playing, it will stop automatically. TECHNICAL SPECIFICATIONS Power Supply AC adaptor 5V 2000mAh Power Consumption 10W Audio Output Power 2 x 5 Watts Unit Dimension 400 x 300 x 215mm Net Weight 6.
PAGE 12
DETAILS AND PRECAUTIONS ON THE USE OF BATTERIES - Discard a used battery in nature or garbage pollutes and prevents the recovery of recyclable materials. It is therefore important to limit consumption of batteries and follow these guidelines:  focus on alkaline batteries (that last longer than the saline batteries) and when possible, rechargeable batteries  deposit batteries and accumulators in specific containers arranged among traders.
PAGE 13
- We recommend an adult to supervise children when they change the batteries so that these instructions are complied with or to make himself the replacement of batteries. - If a battery is swallowed, immediately consult a doctor or poison control center nearest you. Do not forget to carry the product with you. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
PAGE 14
measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules.