User's Manual
31
ENGLISH
Radio mode
Storing stations or calling stored
stations
Select the desired memory bank.
If necessary, set the desired station.
Press the station button 1 - 5
=
for approx.
2 seconds to store the current station under
the button.
- or -
Brie y press the station button 1 - 5
=
to call
up the stored station.
Scanning stations
The scan function allows scanning all receivable
stations of the current waveband or all stations
stored in the current waveband.
Note:
You can adjust the scan time for each sta-
tion (see the chapter "User settings", section
"Making settings in the "VARIOUS" menu",
menu item "SCAN TIME").
Scanning all receivable stations
Press the MENU button
2
for approx. 2 sec-
onds to start scanning.
During the scan, the display alternately dis-
plays "SCAN" and the current frequency as
well as memory bank or station name.
Brie y press the
/ button
7
to continue
listening to the station that is currently being
received.
Scanning all stored stations
Press the
/ button
7
for approx. 2 sec-
onds to start scanning.
During the scan, the display alternately dis-
plays "SCAN" and the current frequency as
well as memory bank or station name.
Brie y press the
/ button
7
to continue
listening to the station that is currently being
received.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for
and store the 5 FM stations o ering the strongest
reception in the region in one memory bank, Any
previously stored stations in this memory bank are
deleted in the process.
In the reception areas "EUROPE" and "THAILAND",
you can store 5 FM stations in the FMT memory
bank with Travelstore. In the reception areas "USA"
and "SOUTH AMERICA", you can also store 5 AM
stations in the AMT memory bank.
Select a memory bank of the desired wave-
band, e. g. FM1 or AM.
Press the SRC button
>
for approx. 2 sec-
onds.
The tuner starts the automatic station seek
tuning; the display shows "FM TSTORE" or
"AM TSTORE". After the storing is completed,
the radio plays the station at memory location
1 of the FMT or AMT level.
Notes:
For the reception area "EUROPE": If the
priority for tra c information is switched
on (
), only tra c information stations
are stored.
If the FMT memory bank is deactivated
(see the chapter "User settings", section
"Making settings in the "TUNER" menu",
menu item "BAND"), it is automatically
reactivated if you initiate the Travelstore
function.
PTY
In the reception areas "EUROPE" and "USA", an FM
station can transmit its current programme type,
e. g. CULTURE, POP, JAZZ, ROCK, SPORT or SCI-
ENCE. Hence, the PTY function allows a targeted
search for broadcasts of a certain programme
type, e. g. for rock or sports broadcasts. Note that
PTY is not supported by all stations.
쏅
쏅
•
•
02_MadSanTor_gb.indd 31
02_MadSanTor_gb.indd 31
11.11.2010 11:12:03 Uhr
11.11.2010 11:12:03 Uhr