User's Manual

ManualsBrandsSHENZHEN TOKWA PRECISION TECHNOLOGY ManualsCD-playersCAR CD RADIO PLAYER WITH BT

ENGLISH

Placing the device in operation | Tra c information | Radio mode

Display brightness

You can manually switch the display brightness

between daytime mode and night-time mode or

switch automatically with the driving lights of the

vehicle.

Note:

The manual or automatic switching of the

display brightness is selected in the user

menu (see the chapter "User settings", sec-

tion "Making settings in the "DISPLAY" menu",

menu item "DIMMER").

Press the DISP button

for approx. 2 sec-

onds to manually switch the display bright-

ness.

Switching demo mode on/o

The demo mode shows the functions of the car

sound system as scrolling text on the display. By

pressing any button, the demo mode is interrupt-

ed and you can operate the device.

The demo mode can be switched on and o in the

user menu (see the chapter "User settings", section

"Making settings in the "VARIOUS" menu", menu

item "DEMO MODE").

Bluetooth® functions

(only Toronto 410 BT)

The Toronto 410 BT can be connected with suit-

able cell phones and MP3 players via Bluetooth®.

This enables it to perform hands-free calling with

the connected telephone (via the loudspeakers

and the integrated microphone of the car sound

system) and audio playback of MP3  les stored on

the Bluetooth® device.

Note:

You can also connect an external microphone

for hands-free calling (see the chapter "Instal-

lation instructions").

For the Bluetooth® functions of the Toronto 410 BT,

please read the enclosed "Bluetooth® instructions

for Toronto 410 BT".

쏅

Tra c information

In the reception area "EUROPE", an FM station can

identify tra c reports by means of an RDS signal.

If priority for tra c reports is switched on, a traf-

 c report is automatically switched through, even

if the car sound system is currently not in radio

mode.

If priority is switched on, the display shows the

tra c jam symbol (

). "TRAFFIC" is displayed

during a switched-through tra c announcement.

The priority is activated and deactivated in the

user menu (see the chapter "User settings", sec-

tion "Making settings in the "TUNER" menu", menu

item "TRAFFIC").

Notes:

The volume is increased for the duration

of the switched-through tra c announce-

ment. You can adjust the minimum volume

for tra c announcements (see the chapter

"User settings", section "Making settings in

the "VOLUME" menu", menu item "TRAFFIC

VOL").

To cancel a switched-through tra c an-

nouncement, press the SRC button

Radio mode

RDS

Many FM stations broadcast an RDS (Radio Data

System) signal in addition to their programme

in the reception area "EUROPE" that allows the

following additional functions:

The station name is shown on the display.

The car sound system recognises tra c an-

nouncements and news broadcasts and can

automatically switch them through in other

operating modes (e. g. in CD mode).

Alternate frequency: If RDS is activated, the car

sound system automatically selects the best

receivable frequency for the station that is cur-

rently set.

•

02_MadSanTor_gb.indd 29

11.11.2010 11:12:02 Uhr