Operation Instruction

When you hear "Password error", check if the Wi-Fi password
you entered in the app is correct;
When you hear "Authentication method error", please make
sure that your Wi-Fi network is not in an enterprise-level network
connection mode, as the camera only supports networks with a
security level below WPA-2;
When you hear "AP does not exist", please check if you have
selected or entered the correct Wi-Fi name. Please place the
camera near the Wi-Fi router and make sure the router is
powered on. Also, please note that 5 GHz Wi-Fi cannot be
searched by the camera either;
When you hear "IP acquisition timeout", it means that you have
too many devices connected to the router and to connect more
devices, please delete some infrequently used devices or reboot
the router to clear the unconnected camera whose lease has
expired, and you may need to contact the router administrator;
When you hear "Server connection failed", please check if your
router is properly connected to the external network. This is
usually the case when your home network is disconnected or the
router you choose is a server on the LAN. Please make sure the
network connection is normal, and try to connect again by
temporarily turning off the firewall.
Possible problems with binding:
06