User's Guide

24
Connect via WPS
Wi-Fi Protected Setup (WPS) allows WPS-enabled devices to be connected to a
Wi-Fi network without having to type a Wi-Fi password.
1. With your mobile hotspot powered on, press and hold the WPS button for
one (1) second.
2. Within two (2) minutes, press the WPS button on the wireless device you want
to connect with.
3. Your mobile hotspot will display “WPS success“ when the connection has
been successfully established.
Connect via USB Tethering
You can also connect your Wi-Fi enabled device to the mobile hotspot using a
micro USB cable (sold separately) instead of using the Wi-Fi network.
1. Make sure your mobile hotspot is on and has an active data connection.
2. Connect one end of the micro USB cable to the hotspot and the other end
to your device.
3. Your device will detect a network connection via USB automatically.
4. Check your connection by visiting a website.