User's Guide

Turn Wi-Fi on and connect to a wireless network

Use the wireless and networks setting menu to enable your phone’s Wi-Fi radio and connect to an

available Wi-Fi network.

1. From home, swipe up to access Apps, and tap Settings .

2. Tap Network & Internet > Wi-Fi.

3. Slide the Wi-Fi switch to the On position.

• Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.

• To disable Wi-Fi, slide the Wi-Fi switch to the Off position.

4. Tap a Wi-Fi network to connect, enter the password (if it’s not an open network), and then tap

Connect.

Your phone is connected to the Wi-Fi network. You will see ( ) in the status bar.

• The password, for a household wireless LAN router, is sometimes found on a sticker on the

router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For pass-

word for a public wireless LAN, check with user's service provider.

• Entering a password is not required if an access point is not security protected.

Note: The next time your phone connects to a previously accessed secured wireless network, you

will not be prompted to enter the password again, unless you reset your phone to its factory de-

fault settings, or you instruct the phone to forget the network.

Note: Wi-Fi networks are self-discoverable, which means no additional steps are required for your

phone to connect to a Wi-Fi network. It may be necessary to provide a user name and password

for certain closed wireless networks.