User's Manual

13
battery and accessories. When the battery is idle,
it is recommended to put it into the protection box.
Follow the following diagram to install the battery.
Note: Do install the battery as per the diagram so
as prevent the battery contact patch being
damaged.
Charge Battery
1. The new battery cannot reach the optimal
efficiency unless it has undergone several
continuous complete charges and
discharges.
2. When the battery is used up, charge it in
Battery
14
time. Over-discharge can damage the
battery.
3. After the battery is charged full, cut off
the connection of charger with the AC power
supply and then the connection with the
mobile phone.
Follow the following diagram to connect the
charger.
During charging, the battery capacity icon on
the screen flickers from the right to the left. After the
battery is charged full, the icon is full of bars.
Slight heat during charging is normal.
Notices on using the battery
The performance of the battery is affected by
many factors, including radio barrier network
settings, signal strength, work temperature, chosen
and used functions or settings as well as phone
accessories, tone, data or other applications.
For optimal performances, please follow the
rules below:
1. New battery or the battery having been idle
for long need charging for long.