User's Manual
71
the Bluetooth services supported by my
device.
Tip: When searching Bluetooth devices, make
sure that the peripheral Bluetooth devices are
within the signal cover range and can be
searched. To match the searched devices,
you need to discuss with the user of this
device about a pair of matching passwords
(0000). To match the hand-free device, you
must input its matching password. After
matching, this device will be saved in my
device view.
Use Bluetooth to Receive/Send Data:
1. Open the applications needed to save
the content to be sent. For example, to send
photos to another compatible device, you
should enter the album or file management.
2. Choose the content to be sent, and
then choose Options->Send->To Bluetooth.
The screen will display the device supporting
Bluetooth wireless technology and within the
signal coverage. To disconnect search,
choose “Cancel”.
3. Choose the device to be connected with.
4. If another device requires matching
before data transmission, the device will
72
send hint and require inputting matching
password (0000).
5. After the connection is established, the
mobile phone will display data
transmission speed.
6. When other Bluetooth devices send
data to my service, the mobile phone will hint and
ask whether to receive the data. The received data
will be stored in the initially set Received folder.
You can use the Bluetooth headset for
communication and listen to music:
The mobile phone supports communication
with Bluetooth; you can listen to music with the
stereo Bluetooth headset. Before using these
functions, you need to connect the mobile phone
with Bluetooth headset and choose the desired
services. To listen to music, you need to choose
sound step; it is necessary to choose handfree
device service for communication.
Tip:
1. The function of using Bluetooth
headset for calls is limited to only host (SIM1)
call. If alternate SIM1 calls are available, this
function will not be supported.
2. Before using Bluetooth headset for
calls, please go to the menu settings to confirm