User's Manual

49
z Change Password: You can change
the defaulted phone password “1122” into
4-8-digit number easy to remember.
z Fixed Dial: This function needs the
support of the SIM card and the network
operator. When it is activated, you can only
dial the phone numbers saved in SIM1 fixed
dial list. To activate it, you need to input SIM1
PIN2 code.
z Barred Dials: You can set barring all or
some dials. (SIM card support needed)
2. SIM1 Security Setup: You cannot have such
setting until you insert SIM1, similar to SIM1,
no more descriptions are needed.
Restore factory settings
You can restore the factory settings of the
mobile phone. The factory setting password is
0000.
Camera
With this function, you can use the inbuilt
camera to take photos. The lens of the camera is
50
located on the back of the slide and the screen is
used as the viewing window. All photos taken are in
JPG form. After downloading the photos onto PC,
you need some software to view them.
If the storage space of the mobile phone is
insufficient to store the taken photos, it is necessary
to delete some old photos or other files in “File
Management” function list to release more space.
Description of Camera Options:
1. Photos: To view the saved pictures.
2. Camera Settings: Set the related property of
the camera during shooting.
1) LED highlight: You can set it ON or OFF
2) Shutter Sound: EQ 1, EQ2, EQ3 or Off
3) EV: EV-4 —EV+4
4) Banding: 50Hz or 60Hz
5) Delay Time: 5s, 10s, 15s or Off.
6) Cont Shot: Single, Three, Five or Off.
3. Image Settings: Set the size and quality of
pictures.
1) Image size: 240×400,
640×480,1280×1024, 1600×1200,
2048*1536.
2) Image Quality: High, Middle, Low
4. White Balance: Auto, Daylight, Tungsten,
Fluorescent, Cloud, Incandescence and