User's Manual

21
to the switchboard at first then put through
extension number. The mobile phone can
automatically dial extension number if you
input “P” between the switchboard and
extension number. Method for input “P” as
following: hold press or continually short
press three times “*” key (“P” will be shown
on the display).
2. Dial fixed-line telephone extension as
following: phone number + “P” + extension
number + dialing key
z Emergency calls
If your phone is under the network coverage
(you can know this by checking the signal bar at the
up left corner on the screen), you can make
emergency calls. If your network supplier does not
provide roaming service in this area, Emergency
will be shown on the screen. That means you can
only make this kind of calls. If your phone is under
the network coverage, you can even make
emergency calls without the SIM card.
In some areas, 112 (emergency call) service is
provided by the network operator. In case of failure,
consult the network operator.
z IMEI
22
It stands for International Mobile Equipment
Identity number. Switch off the mobile phone
and take off the battery, then you will see the
label with such number on the back of the
mobile phone. Also, this number is saved in
the mobile phone. After switching on, in
standby state, you can input “*#06#” to
display it.
5. Basic Operation
Switch on
Press the Switch-on/off key to switch on the
mobile phone. If the SIM card and mobile phone do
not set with password protection, then the mobile
phone will enter the switch-on menu to search
network. After the mobile phone is registered to the
network, the network operator name will occur on
the screen. In such case, you can dial or receive a
call.
After switch-on, if the mobile phone hints “Insert
SIM card”, switch off the mobile phone and check if
the SIM card is installed or installed properly.