User's Manual

37
abroad, you can dial the calls of the current country
and the original country (the service providers
allows to do so).
 Incoming calls:
1. All calls: You can bar all incoming calls.
2. When roaming: You can bar all calls except the calls
of the local service area.
 Cancel all: You can cancel call barring settings and
dial/receive calls normally by putting the password.
 Change barring password: You can apply to the
network to change the password for call barring.
¾ Black list: You can set it as On or Off. You can use the menu to
reject the number you do not want to receive.
¾ Auto redial: You can set it as On or Off. After the first
automatic redial fails, at most ten times can be available to
connect a phone number.
¾ Speed Dial: You can set whether to activate this function and
edit the related speed dialing numbers. If this function is
“Active”, then you dial any of the corresponding individual keys
(2-9) on the standby interface to dial the number specified for
this key.
¾ More:
■ Call time display: You can set whether to display call duration
during call conversation.
■ Call time reminder: You can set one alert tone or periodic alert
tone for several round minutes during call conversation so that you can
understand call time. You can also turn off the alert tone.
■ Auto quick end: You can set call duration. After the set time
expires, the mobile phone will automatically end the call.
 Line switching: You can chose line1 or line 2 for your phone.
 Closed user group: You can closed the user group which you
selected.
38
Note: Some settings need network support. For example, call barring
can not be used unless the local network and SIM card open it.
Network Setup
¾ Network selection: You can search the network again. Select
your favorite network and choose to register the network
automatically or manually.
¾ Preferred network: You can set the preferred registered network
for SIM card.
¾ GPRS connection:You can set the status of GPRS connecti-
on(when need or always)by this function.
Security Setup
¾ Security setup: By this function, you can set the SIM lock,
Phone lock,Auto keypad lock,Fixed dial, Barred dial and
Change password.
 SIM Lock: You can set SIM lock (PIN code) as on/off. When
this option is chosen, it is necessary to input PIN code when you
power on the phone.
 Phone Lock: You can set it as On or Off. It is a password of 4-8
digits and the defaulted one is 1122. You can change it.
 Auto keypad lock: You can set it as On or Off. The mobile
phone has keypad lock function. When it lasts certain time, the
keypad will be locked, including such options as Off, 5s, 30s,
60s and 5min.
 Fixed dial: This function needs the support of the SIM card and
the network operator. When it is activated, you can only dial the
phone numbers saved in host fixed dial list. To activate it, you
need to input PIN2 code.
 Change Password: You can change the defaulted PIN, PIN2,
Phone password.
Restore Factory Settings
You can restore the factory settings of the mobile phone. The
restore factory setting password is 1122.