User's Manual

36
 Auto redial: You can set it as On or Off. After the first
automatic redial fails, at most ten times can be available to
connect a phone number.
 Speed Dial: You can set whether to activate this function and
edit the related speed dialing numbers. If this function is
“Active”, then you dial any of the corresponding individual keys
(2-9) on the standby interface to dial the number specified for
this key.
 More:
■ Call time display: You can set whether to display call duration
during call conversation.
■ Call time reminder: You can set one alert tone or periodic alert
tone for several round minutes during call conversation so that you can
understand call time. You can also turn off the alert tone.
■ Auto quick end: You can set call duration. After the set time
expires, the mobile phone will automatically end the call.
 Line switching: You can chose line1 or line 2 for your phone.
 Closed user group: You can closed the user group which you
selected.
Note: Some settings need network support. For example, call barring
can not be used unless the local network and SIM card open it.
Network Setup
 Network selection: You can search the network again. Select
your favorite network and choose to register the network
automatically or manually.
 Preferred network: You can set the preferred registered network
for SIM card.
 GPRS connection:You can set the status of GPRS connecti-
on(when need or always)by this function.
Security Setup
 Security setup: By this function, you can set the SIM lock,
Phone lock,Auto keypad lock,Fixed dial, Barred dial and