User's Manual

36
Note: The precision of this calculator is limited and can be used for
simple calculation.
User profiles
Your mobile phone is provided with multiple profiles so that you
can customize some settings in different cases for different events.
Firstly, as per your personal hobby, have individualized settings on
profile and then activate it. You can have such profiles as General,
Meeting, Outdoor, Indoor, Headset and Bluetooth.
The content can be edited at every profiles mode as following:
 Tone setup: Include Incoming Call, Power on, Power off,
Message tone and Keypad tone.
 Volume: Set the volume of Ringtone and Key tone.
 Alert type: You can choose any one from Ring only, Vibration
only, Vibration and ring, Vibration then ring as the current ring
mode.
 Ring type: You can choose any one from Single, Repeat,
Ascending as the current ring type.
 Extra tone: You can have Select/Cancel settings on Warning,
Error, Camp on and Connect so as to have corresponding tone
tips.
 Answer mode: You can choose whether to use any key to
answer.
After individualized settings, choose “Activate” in “Select” to
start profiles.
Note: After the headset is inserted into the mobile phone, the mobile
phone will automatically change into headset profile. Unplug the
headset to return to the previous profile.
After the Bluetooth is connected with the mobile phone and used
as headset or handsfree, the mobile phone will automatically change
into Bluetooth profile. Disconnect with Bluetooth to return to the
previous profile.
In standby state, press # key for several seconds to switch to