User Manual

13
1. “Input phone lock code”——If you have set the password.
2. “Input PIN” —— If you set SIM card password.
3. “No service”—Indicates fail to make register and cannot make any
calls.
4. “Emergency calls only”—indicates has registered to other network
and only can make call to 112.
5. “Searching”—the mobile phone is searching network until find
appropriate network.
6. “Operator name”—Indicates network successfully registered.
Note: If you do not know PIN code, please contact the network
service provider.
The defaulted phone password “1122”
Switch off
To switch off the mobile phone, press the end key. When the
screen displays switch-off cartoon.Do not take out the battery to switch
off the mobile phone. If so, the SIM card can be damaged easily and
some data will be lost.
Dial a Call
 With the number keypad, you can enter phone numbers (if
wrong characters are input, press the clear key to delete them).
Press the dial key to dial the phone number. To end a call, press
the end key; or to cancel a dial, press the Cancel key or the
switch-on/off key. After the call is connected, you can see the
call timer on the screen.
 Dial a call via phonebook: Enter the phonebook and search the
desired name/phone number, and then press dial key to dial call.
 Redial latest dialed number: In standby state, press dial key to
view the list of the latest dialed phone numbers or names. Roll
to the desired phone number or name and press dial key to dial
call.