User's Manual

Connection Instructions
Scan the QR Code to download the app
Baseus version (download the Baseus App, and open the wireless function of your cell phone).
1. Press the power switch for 2 seconds to turn on.
2. Open the Baseus App.
3. Tap “add a device” in the app to add Baseus Smart Atomizing Air Freshener.
Note: Connection should be completed within 3 minutes after power-on, otherwise a restart is
required for connection.
If the connection fails or the device cannot be found, please restart the device and try again.
Restoring factory settings
Open the bottom case, and press and hold the “rest” button for 10 seconds.
Installation Instructions
1. Prepare the main body of the product and the essential oil container.
2. Rotate the bottom case clockwise to open.
3. Rotate the lid of the essential oil container to open, and keep the cotton stick still.
4. Align the container to the main body and press it in.
5. Rotate the bottom case to close.
6. Remove the protective film of the bottom removable adhesive, and choose an appropriate place
to install the product.
Note:
1. Please be careful when opening the lid of the essential oil to avoid spilling and dropping the
cotton stick.
2. Install the essential oil container in place (flush with the bottom).
Tips
1. Avoid placing the product in high temperatures or under direct sunlight as much as possible.
2. Avoid placing the product within the range of a car airbag fully ejected.
3. Avoid placing the product on a surface that cannot keep the product level.
4. Avoid using the product in a dusty or complicated environment.
5. The product should be regularly recharged to maintain sufficient power.
6. The product may accumulate water drops on the surface when it is used in low temperature
environments. Please wipe off immediately. It will not affect the normal use.
7. Essential oil has slight corrosive effects. Please avoid prolonged exposure to the skin and
dashboard.
8. The product adopts a high gloss curved surface treatment. Please use a soft cloth to wipe off
residual fingerprints and other foreign objects to avoid scratching the surface.