Product Specs

of the receiving coil on the mobile phone end (anti-skid ring), the center of the transmitting coil
is offset from the allowable distance (±3mm). If the deviation is too large, the transmitter will
not work, and the phone needs to be correctly placed again, and the device will re-enter the
charging state. The watch can be placed directly in the charging position.
Indicator Light Description: The power standby indicator (spaceman's eyes) is on, another color is
on when wireless charging is working, indicator lamp will not off when power on.
FOD foreign body detection: there is a metal foreign body light flashing, and protect until the
metal foreign body leaves the charging range.
Spaceman shape: The head can be rotated from side to side at an Angle of about 30 degrees.
Disassembly method:
1.) Assembly: Aim at the base gap and press down the spaceman, and hear a click sound.
2.) Disassembly: Hold one leg of the spaceman and push it up against the base with your thumb
(transportation needs)
3. Basic Parameter
3.1 Performance Parameter
3.1.1 TX Input voltage/currency：DC 9V/2.2A
3.1.2 TX Input current (no load)：≤0-150mA （scanning runout mode）
3.1.3 TX Output current：Single 15W Charging DC9V /1.67A Dual 15W Charging 9V/3.5A
3.1.4 Max Output for Watch：500mA
3.1.5 Max Output for USB-A interface：5V 1.1A
3.1.6 Efficiency (full load)：≤80%
3.1.7 15W Working Frequency：Variable frequency 110KHz -205 KHz
3.1.8 7.5W Working Frequency：Fixed frequency 127.7KHz
3.1.9 Ripple & Noise：≤200mVp_p
3.2.0 Working temperature：0-40℃
3.2.1 Relative humidity：10%~80%