PRODUCT SPECIFICATION Customer Name: Product Model No.
Content Item 1. Product Function 2. Basic Operation 3. Basic Parameter 4. Electric Character 5. Charging Range Test 6.Sensitivity Test 7. Reliability Test 8. Automatic Protection Function 9. Product Outline 10.
1. Product Function 1.Wireless charging function introduction This product realizes short distance radio transmission through magnetic induction mode, and adapts to PD protocol QC2.0 protocol double 9V 1.5A digital product charging and communication, furniture, fire, waterproof and other digital products. The product conforms to the Qi wireless charging standard. Mobile phones compatible with the Qi standard can use this product to charge, supporting the quick wireless charging function.
Indicator Light Description: for the first power on, the red, green and blue light flashes out for 3 times. The blue light flashes for 3 times when the phone is charging, and the green light flashes for 3 times when the charge is disconnected. There is no light indication for watch charging.
3.2 Apparent Parameter 3.2.1 Size：13.25CM(base)*16.5CM*（height） 3.2.2 Color：White+yellow wood grain，Black + silver grey 3.2.3 Materials：PC、ABS 3.2.4 What is in the box：1M length 3A TYPE-C cable，Bilingual manual, color box 3.2.5 Input interface：TYPE-C（PD QC dual agreement） Output interface：TYPE-C 3.2.6 Usage：desktop 4. Electric Character 4.1 Average working trouble-free time: 20,000 working hours, average failure rate less than 0.5% at 25℃. 4.2 Aging test: normal temperature, full load aging time 24H. 4.
7. Reliability Test 7.1 High temperature storage test: the test temperature is 85℃±2℃, and the continuous test time is 4H. After the test, the appearance and electrical properties are normal after being placed at room temperature for 4H. 7.2 Low temperature storage test: the test temperature is -10℃±3℃, and the continuous test time is 4H. After the test, the appearance and electrical properties are normal after being placed at room temperature for 4H. 7.
9.
FCC Warning 15.19 Labeling requirements This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.
