User's Manual

83
8.Q:IcannotaccessInternetinWISPMode;whatshouldIdo?
a. Make sure your wireless network adapter is functioning
correctly on your PC and wireless signal is strong enough. If there
are too many available wireless networks, it is advisable to use
802.11b/gmodeforlessinterference.
b. Make sure yo
u entered correct SSID and MAC address of
the link partner on the device. It is advisable to use the “Open
scan”option.
c.MakesurethedeviceWANIPandLANIPaddressesarenot
on the same IP net segment. If so, change the device LAN IP. Th
e
device's IP address is set to 192.168.2.1 to avoid IP conflict with
otherdevices.Generally,youdon'tneedtochangeit.
d.Makesureantennaonthedeviceisnotdetached.
Ifyoustill areunabletoaccessInternetafteryoutriedall the
abovesteps,contactourt
echnicalstaffforhelp.

Website:www.tendacn.com
TechnicalSupport:[e-mail]


ShenzhenTendaTechnologyCo.,Ltd


