User's Manual
79
WindowsXPSP1.
Appendix 4 FAQs
This section provides solutions to problems that may occur
duringinstallation andoperationofthedevice.Readthefollowing
if you are running into problems. If your problem is not covered
here, please go to our website of www.tendacn.com or e‐mail to
support@tenda.cnforhelp.
1.Q:Ienteredthede
vice’sLANIPaddressinthewebbrowserbut
cannotaccesstheutility.WhatshouldIdo?
1) Verify physical connectivity by checking whether a
correspondingport’slinkLEDlightsup.Ifnot,tryadifferentcable.
Note that an illuminated light does NOT ALWAYS indicate
successfulconnectivity.
2)InWirelessRoute
rMode,you mustuseawirelessnetwork
adapter to connect to the device, asthe only Ethernet portworks
as a WAN port for Internet connection; while in Wireless AP,
UniversalRepeaterModeandClient Mode,youmustspecify anIP
address(192.168.2.2~192.168.2.254)onyourPCtoconne
cttothe
device.
3) Click “Start" ‐‐ “Run”, enter “cmd” and then“ping
192.168.2.1”on appearing CLI to diagnose whether your PC has