User's Manual

33


Select auto (auto‐negotiation), 10M half duplex, 10M full
duplex, 100M half duplex or 100M full duplex depending on your
networkenvironment.
TheWANportspeed/duplexmodemustmatchthatofthelink
port to achieve successful communication; otherwise, the WAN
port may not function properly. So, if you are not sure about the
linkport’sspeed
/duplexmode,pleaseselect“Auto”.
TrytochangetheWANspeed/duplexto10Mfullduplexifthe
WAN connection status alternates between "Connecting" and
"Disconnected".

7.4WANMACClone
This section allows you to configure Device’s WAN MAC
address.