User's Manual

30
Chapter 7 Network Setup
7.1LANSetup
This section allows you to config the TCP/IP settings for the
device’sLANinterface.

IP Address: Device's LAN IP address, 192.168.2.1 by default.
You can change it according to your needs; just remember to use
thenewonetologontothedevice’swebutilityifyouchangedit.
Subnet Mask: Device’s LAN subnet mask, 255.255.255.0 by
default.
Note:Ifyouchangethedevice’sLANIPaddre
ss,youmustuse
thenewonetologontotheweb‐basedconfigurationutility.


7.2WANSettings
WAN setup is only available in WISP Mode and Wireless
RouterMode.