User's Manual

9
Chapter 3 Mode Overview
The device provides modes of Hotel, Residence and WISP to
meet different network environments. By default, the device can
automatically detect your Internet connection type and switch
betweenHotelmodeandResidencemode.Youcanalsodisable itif
youdon'twantthedevicetoauto‐switchbetweenthetwomodes.
Howe
veryoumustselectandsetuptheWISPmodemanuallyifyou
wanttouseit.
3.1HotelMode(DynamicIP)
ThedeviceoperatesinHotelMode(alsoknownasDynamicIP
orDHCP)bydefault.Inthismode,thedevicefunctionsasa
wirelessroutertoobtainanIPaddressandDNSserver
automaticallyfromyourISP.Simplyconnecttoitwirelesslyand
multipleuserscansharetheInternetconnectionconcurrently.No
configurationneeded!Simplyconne
ctthedevicetothebroadband
InterfaceinahotelroomwithanEthernetcableandyourPCtothe
devicewirelessly.Thatisallit!Incaseyouhaveencryptedthe
wirelesswithacustomizedsecuritykey,youwillbeaskedto
provideitwhenattemptingtoconne
cttodevicewirelessly.Simply
enteritthere.Seebelowfortypicalnetwork
topology: