User's Manual

DTMF: Set sending DTMF or not during a call

Swap*: Switch between the active call and the

call on hold

Conference*: Add additional parties to a call.

Note: the menus marked with * must be supported by your SIM

card. For details, please contact your service provider. Only

when two or more calls are on can Swap and Conference

show.

3.8 Insert international access code

When you are dialing an international call, press numeric key *

till the international call prefix “+” shows and then enter the

number in the following order:

+ > Country code > complete number send key

3.9 Dial an extension or voicemail number

You need to enter P (pause) or W (wait) when dialing an

extension number, press numeric key * to switch between ‘P’

and ‘W’. You can enter numbers as following:

District code > exchange phone number > P or W > extension

number > send key

3.10 Emergency calls

You can make emergency calls as long as your current location

is network-covered which you can know by checking the signal

strength bar showing on the top left corner of the screen.

Note: Emergency numbers vary by country. The emergency

number(s) in your phone may not work in all locations, and

sometimes an emergency call cannot be placed due to network,

environmental, or interference issues.