User's Manual

9 10
Product Using / Charging
1.1 Charging: Place the charging dock against the wall, make sure there is 2 meters free space in front of the dock,
1 meter free space on the right and left.
2. Mount the side brush: press the side brush to the slot, you will hear a click sound, that means the installation
is completed.
1.2 Connect the charging dock to the adapter.
3. Turn on the power button: switch it on from the bottom of the robot( 1 is “on”, 0 is “off”)
4. Charging: put the robot on the charging dock station, make sure the charging contact points connect well,
when you hear “beep” it means start charging.
During the cleaning process, when the robot battery gets low, it will return to the charging
dock station automatically.
Put the charging dock against the wall in a flat floor
and connect it to the adapter
ChargingTurn on the power
If the robot comes close to the edge of the stairs, or the small space
among the furniture, please place the fence in order to runs smoothly.
Please do not use the mop on the carpet floor, if there is carpet tassels, draw it to
the bottom of the carpet.
Mount the side brushes