User Instructions

Product Using / Main brush & inlet

15 16

Step

Use the cloth to clean the dust inlet.

Using Water tank

Warm Prompt: do not use the mop when the robot work on the carpet, when the robot cleaning the

hardwood floor, please pay attention to the water level in the tank, fill the water in time, when you t

ry to add the water, please remove the water tank from the robot. When charging, remove the water tank

and replace it with the dustbin.

2. Press the dustbin release button, take out the dustbin, and replace it with the water tank.

1.Stick the mop on the bottom of the water tank, open the plug, inject the water slowly, close the plug.

In order to extending the lifetime, we suggest you to use the pure water or softened water.

Please do not use the mop on the carpet floor.

When you try to add the water or clean the mop during the cleaning process, please keep the robot stay in

a range of less 1 meter radius.

After finish mopping the floor, please empty the water tank and remove the mop.

Application scenario

The main brush applied for the floors that

has more debris, or carpet.

Suction inlet is more suitable for the pet hair.

Disassembly method:

push the main brush release button on both sides

and take out the main brush cover.

Lift up the main brush from the left side and take it out.