User Instructions

Product Using / Start Cleaning
13 14
The robot has multiple cleaning modes, you can change the mode through the robot, remote control, or APP.
Auto cleaning
Application scenario : Smart S shape cleaning route.
Setting: on a standby mode, press the
button on the robot or button on the remote control,
it will start Auto cleaning mode.
.
Warm Prompt: when you use the robot clean only in a single room, please close the door and make
sure it only runs in this room, if there is no charging dock station in the room, it will
returns to the place where it starts.
Edge Cleaning
Application Scenario:
The robot runs on the edge of walls into
corners, after the edge cleaning completed,
it will returns to the charging dock station.
Settings:
Press the button on the remote control,
it will start the edge cleaning.
Spot Cleaning
Application Scenario:
The robot runs on the edge of walls into
corners, after the edge cleaning completed,
it will returns to the charging dock station.
Settings:
Press button on the remote control, it
will start spot cleaning.
Warm Prompt:
When you try to add the water or the robot got
stuck during the cleaning process, please keep
the robot stay in a range of less 1 meter radius,
so that the robot will continue to finish the
remaining work.
If the pausing lasts more than 60 minutes, the robot will forget
the previous memory, and it will start cleaning in the beginning.
one metre
one metre
the location of pause
OR