User's ma n u a l o f t e c b o t r o b o t v a c c u m Please read this manual carefully before using the product and keep it properly
Thanks f o r c h o o s i n g o u r p r o d u c t The product is a cleaning robot integrated with sweeping, vaccum and mopping. With laser real-time construction of cleaning map and self planning of sweeping path, it can complete a full coverage cleaning.The machine has a variety of perception functions and super obstacle ability, easily adapt to the complex home environment.
Pr oduct i n t r o d u c t i o n Device Type-C socket (connect to computer for upgrading) Start / pause WiFi signal light Automatic recharge Laser pick up Direct charging 1
Pr oduct i n t r o d u c t i o n Acc e s s o r i e s l i s t Mopping roller Side brush *2 Power adapter (optional) AUTO Recharging station Power adapter (optional) Remote control 2
Pr oduct i n t r o d u c t i o n Water t a n k h a n d l e Flap Water inlet Outlet of sewage tank Water inlet of cleaning water pump Sewage tank buckle water tank Sewage tan k Device Dust bin handle Dust bin Dust bin buckle Dust bin cover Dust bin filter element Dust bin 3
Product i n t r o d u c t i o n De v i c e a n d s e n s o r Front sensor Front receiver Impact buffer Edge sensor right receiver Left receiver Right rear receiver Rear left receiver 4
Product i n t r o d u c t i o n De v i c e a n d s e n s o r Ground sensor Universal wheel Charging electrode Middle brush Side brush Middle brush cover buckle Along wall sensor Right ground sensor Left ground sensor Main wheel Mopping roller power switch Roller buckle Sewage tank 5
Pr oduct i n t r o d u c t i o n Recharging station indicator light Signal transmitting area Front Charging shrapnel Back Power interface 6
Pr oduct i n t r o d u c t i o n Remote control Standby: press the button, the device is in standby mode AUTO AUTO Automatic: press this button, the device starts sweeping and mopping Automatic recharging: press this button, the device will start to search for the recharging station automatically Forward: press and release this button, the device will move forward and stop when encountering obstacles Backward: press this button, the device goes backward, release the button, the device stops Right: press th
Product operations/ cautions Please clean the wire and sundries scattered on the ground. And remove the articles that are easy to fall, fragile, valuable and etc away before starting.To avoid being entangled, stuck, dragged or knocked down by the device, and causing personal or property damage. If you use this product in a suspended environment, be sure to use a solid physical barrier to prevent the divice from causing personal or property damage due to accidental fall.
App Download App download and network control 1. Scan the QR code below to download the "tecbot" application. In order to use the full functions of the robot, we recommend to use app to control it. Before starting, please confirm: · Your mobilephone or tablet is connected to the Wi-Fi network. ·The system of your mobilephone or tablet is IOS 8.0 (or above) or Android 4.4 (or above) ·The router supports 2.4GHz wireless signal. ·The WiFi signal is flashing.
To add the device and set the connection and WiFi on APP Step 1: regist account number Step 2: click to Add device Step 3: connect power Cancel WIFI Reset device No device Add device Land Turn on the device and waiting for 10 seconds, and then turn on the power after the breakpoint Regist Last step Home page Step 4: start the robot, press the home button for 3-5 seconds, and the WiFi signal light starts to flash.
installation 1. After taking the unit out of the packaging box, please remove the protective foam on both sides of the host. 3. Install the side brush. Protective foam Protective foam Protective foam 4. Install the mopping roller. 2. Please check the installation of the sewage tank, middle brush and dust bin is loose or not.
install Device charging Rec h a r g i n g s t a t i o n When the power of the device is less than 15%, it will automatically find the recharge station to charge. You can also directly press the remote control recharge button to start the automatic recharge function. During the charging process, the mopping roller will automatically lift to keep the ground clean. Place the recharging station on the horizontal ground close to the wall and connect the power supply. Over 0 .6m Over 0 .6m Over 1.
instruct i o n s Wa t e r t a n k f i l l i n g Power on / off Open the flap to take out the water tank and open the rubber plug and put the water into the tank, then plug the rubber plug tightly when the tank is full. Put it back to the device, and close the flap. The power switch is on the right side of the bottom. (as shown in the figure above) Press "1" for power on, press "0" for power off. After power on, the device needs about 10 seconds for self checking.
instruct i o n s Cleaning path 1. After starting, you can choose one of the five cleaning modes (automatic, sweeping, wet mopping, fixed point sweeping, and fixed point wet mopping). After pressing the function button, the device will start to go straight and select the right side to do edge cleaning, when it meets a wall or a large obstacle. And it will do S path cleaning, when it meets a wall or a large obstacle on the other side.
instruct i o n s Cleaning method 1.If the automatic function is selected, the device will automatically start the "sweeping, suction and mopping" functions. The device will automatically clean one side of the environment, and then clean the other side. The mopping roller descends and starts to mop the floor 2. sweeping: after selecting the "sweeping" function, the device will automatically turn on the function of suction and sweeping, and the mopping roller will rise up.
instruct i o n s Cleaning method 4. Fixed point sweeping Press the standby button of the remote control, select the required direction button, control the device to the required cleaning area, then press the fixed-point sweeping key, the device starts to clean in the area of 1.5m x 1.5m, After cleaning, the device will return to the original location. 5.
Routine m a i n t e n a n c e Middle brush Middle brush cover *Cleaning is recommended at least once a week Middle brush cover buckle Use the matching cleaning brush to clean the entanglement on the middle brush. After cleaning, replace the brush and press the buckle of the cover. Middle brush Turn over the machine, push the clips on both sides to the middle, take down the middle brush cover, and then take out the middle brush.
Ro utine m a i n t e n a n c e Ground inspection window *It is recommended to clean up once a month Side brush *It is recommended to clean up once a month Turn over the device, wipe and clean the inspection window with cotton swab, and keep the inspection window clean. 1. Turn over the device and remove the screw of side brush. 2. Remove and clean the side brush 3. Fasten the screw.
Routine m a i n t e n a n c e Dust bin Universal wheel *It is recommended *It is recommended to clean at least once a week to clean at least once a week Clean the hair and dirt on the wheel body or axle (1) Open the flip, turn the handle 90 ° and take out the dust bin upward.
Ro utine m a i n t e n a n c e Cleaning dust bin assembly *It is recommended to clean up once a month (1) Pull out the back cover assembly from the dust bin, then take out the HEPA and sponge from the back cover. back cover Sponge HEPA Sponge Filter net Dust bin back cover Note: please clean with water, do not add any detergent. (2) Clean the dust bin, sponge, HEPA and back cover with clean water. (3) The dust bin, sponge, HEPA and back cover shall be dried thoroughly before reusing.
Ro utine m a i n t e n a n c e Sewage tank *It is recommended to clean it once per using (1) Press down the buckle and take out the sewage tank. Rubber plug B Rubber plug A Sewage tank Buckle Note: the rubber plug A is a movable rubber plug, which can be taken down gently.
(4) When the sewage tank had been used for many times, please remove the movable rubber plug to clean the water inlet of the water tank. (2) Open the rubber plug and pour out the sewage. Note: it is recommended to clean once every three months (3) Clean the sewage tank with clean water and clean the dirt with provided brush. Note: after the sewage tank is cleaned, please dry the surface with a paper towel and install it back to the device.
Routine m a i n t e n a n c e Mopping roller (2) Turn over the device, gently push upward to open the buckle and take out the roller. (1) Take out the sewage tank first Buckle mopping roller (4) Dry or wring by hand. (3) Please clean the roller with clean water.
Basic pa r a m e t e r s Device name Parameters Overall dimension 350x350x108mm product weight about4.5kg Suction power 4000Pa Battery 14.
Name and content of harmful substances in products Harmful substances Part name lead mercury chromium ( Pb) ( Hg) (Cd) Hexavalent chromium (Cr(VI)) polybrominated biphenyls (PBB) polybrominated diphenyl ethers (PBDE) Circuit board Metal parts cabinet Battery Other parts This table is compiled according to SJ / t11364 It indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit specified in SJ / t11364.
common problem p r o b l em Unable to recharge Abnormal noise during cleaning The cleaning capacity is reduced or dust fall occurs The performance of mopping is not good enough Appointment cleaning does not work Charging on the charging station all the time will consume electricity or not Does the first three times using require 16 hours of charging After starting the automatic function, the device automatically switches to sweep only.
common problem problem Abnormal behavior During cleaning, the device will fall off step Unable to avoid obstacles resolvent restart after Power off Please clean the ground sensor Please clean the along wall and the front sensors security information Battery and charging 1. Please do not use any third-party batteries, chargers or recharging station. 2. Please do not disassemble, repair or refit the battery and recharging station without permission. 3.
security information Restrictions on use 1. This product is only used for infloor cleaning at home, but not for outdoor (such as open balcony), non floor (such as sofa, bed), commercial or industrial environment. 2. Please do not use in the hanging environment (such as duplex floor, open balcony, top of furniture) without protective fence. 3. Please do not use it in the environment of higher than 40 ° C, or lower than 0° C or any sticky ground. 4.
Executive Standards: GB4706.1-2005，GB4706.7-2014，GB4343.1-2009，GB17625.1-2012 tecbot robot vaccum Manufacturer: Shenzhen tanbo intelligent robot Co., Ltd Address: Rm. 8CDE, Nanyuan Fengye building, 1088 Nanshan Avenue, Dengliang community, Nanshan District, Shenzhen,China Manufacturer: Guangdong Jingrong Technology Holding Co.
