Operation Manual

TeamGee Electric Skateboard
22
the original charger; otherwise, it might cause fire and even explosions in serious cases.
6. Do not replace the original charging plug, which might be dangerous.
7. It is forbidden to charge in the process of use. Such operation will cause serious consequence, such as fire or
explosions.
8. Please keep the electric skateboard far away from the liquids, inflammables, explosives and other hazardous
substances during the charging. It is forbidden to cover its surface with any objects, and ensure it is well ventilated.
Guide for Charging of Skateboard
Before charging, turn off the power switch of skateboard, reverse the skateboard, with its surface facing
downward and lay it flat, connect the charging cable to the charging port of the skateboard. For charging of
the skateboard, connect the power supply according to the sequence shown in the figure below. When the
skateboard has been fully charged, the indicator light on the power adapter will turn green from red, which
means charging is completed and the charger can be unplugged.
Guide for Charging of Remote Control
Insert the charging cable Micro/USB connector of the remote control into the charging port of the remote