Operation Guide

成为游戏创新的领跑者
Setting the pace in gaming innovation
2
Press and hold pairing button 7 seconds to clear pairing records, Red and Blue lights will blink 3 times
and then records cleared.
LED
Indicator
default to Blue led keeps lighting when the first headphone connected
The Red led indicator keeps lighting when the Second headphone connected successfully
Press and hold pairing button 7 seconds to clear pairing records, Red and Blue lights will blink 3 times
When indicate lights long blink 5 times and short blink 4 times, it is in standby mode
Electric
Parameter
Input：TYPE-C Female
Receptacle to a
15V 2.6A power
Output：TYPE-C Male Receptacle to SWITCH console
Test Guide
1. Check the appearance of Adapter
2. Hold the Console in your left hand, and insert the adapter into the switch Console type-c interface with
your right hand.（If Blue LED light doesn’t blink,then it is a defective one）
3. LED indicator：When indicate lights long blink 5 times and short blink 4 times, it is in standby mode.
When indicate lights long blink 5 times and short blink 4 times, it is in standby mode.
4. Press and hold the paring button for 3 seconds to start Bluetooth searching, Blue light will blink
quickly. Blue light shall keep in lighting if it connected successfully. (If it can not connect successfully,
then it is a defective product)
5. To connect the Second Bluetooth headset, press and hold the pairing button for 3 seconds, the Red
light will blink, and the blue light will flash to indicate disconnection, but it will be connected back
immediately. Turn on the Bluetooth headset for connection, both Blue and Red light will keep lighting
after connection.
6、Re-connection，disconnect console and adapter and then plug adapter to console again. Blue Led light flashes slowly to
reconnect. Blue light keeps lighting once reconnected successfully.(It is defective product if it can not reconnect
successfully)
To Turn off one Bluetooth headset, it defaults to turn off the Red LED light first.
7.There will be a charging indication on console when plug a power to this adapter( If there is no indication on console,
then it is a defective product)
Product
Picture