Operation Guide

成为游戏创新的领跑者
Setting the pace in gaming innovation
1
PRODUCT SPECIFICATION
Product Name： Audio Adapter For Switch
Version
Remark
Date
A1
No LED indication for previous version. The led keeps lighting after connection successfully,
led blink if it hasn’t been connected successfully
2018-12-1
Product Feature:
Product Size：34.2*26.2*54.5mm
Product Weight：16g
Material： ABS+PC
Product Color: Black
Silkscreen：Without
Electrical Specification
:
Model No.
C51
Console
Compatible with Nintendo Switch
Platform
Nintendo Switch
I/O Port
Type-C Male Head and Type-C
Receptacle
Connection
Wired USB for console connection; Bluetooth connection for audio between console and headphones
Brief
Instruction
of Product
1、The product is a mini Bluetooth audio adapter with charging function, two headphones are available
at the same time
2、The product is also a Nintendo Switch console stand
Operation
Guide
Step 1. Hold the Console in your left hand, and insert the adapter into the switch Console type-c interface
with your right hand.
Step 2. When adapter connected to Switch console, the Blue light will flash slowly. Press and hold the
paring button for 3 seconds to start Bluetooth searching, Blue light will blink quickly.
Step 3. Turn on the Bluetooth headset, the Blue light will keep lighting after connecting successfully.
Step 4. If the Second Bluetooth headset is necessary, press and hold the pairing button for 3 seconds, the
Red light will blink, and the blue light will flash to indicate disconnection, but it will be connected back
immediately. Turn on the Bluetooth headset for connection, both Blue and Red light will keep lighting
after connection.
Step 5. To Turn off one Bluetooth headset, it defaults to turn off the Red LED light first.
Step 6. When indicate lights long blink 5 times and short blink 4 times, it is in standby mode
Step 7. Press shortly pairing button to reconnect headphone, it will reconnect in 3 seconds
Step 8. Press and hold pairing button 7 seconds to clear pairing records, Red and Blue lights will blink 3
times and then records cleared.
Pairing
button
1. Press and hold Pairing button for 3 seconds to enter searching mode.
2. If the first Bluetooth headphone connected, press and hold Pairing button 3s to searching the Second
Bluetooth headphone,Red led light blink.