Operation Guide

once connected. At most 10pcs joycon can be connected at the same time.
5. Re-connection and wake up function
Please ensure console is power on before re-connection.
Press any button except sync button to wake up Joy-con, it should connect to console
automatically. You can also slide the joy-con to console and use directly.
Wake up function is only available when Joy-con plugged into switch console.
Plug Joy-con into switch console and press Home button for 1 second, it can wake up the
console.
Button function
1 、 Left Joycon includes Directional Button:UP DOWN LEFT RIGHT Capture - L LZ SL
SYNC SR Button left Stiek
2、Right Joycon includes A B X Y R RZ HOME + SR SL 人、Right Stiek
Built-in function
With vibration and 6 axis
Electric
Parameter
1、Led indicator
When the power of joy-con is too low, the console screen will prompt low power. At this time,
it is necessary to install joy-con to the Switch console for charging. During charging, the
battery label on the main screen will prompt cycle
2. Auto sleep function
If console screen off, joy-con will be into sleep mode automatically.
After the console into sleep mode, press the HOME button to wake up the console.
Current under sleep mode：less than 150uA
Current when paring：less than 25mA
Working Voltage：3.0V Working current：less than 26mA
Input Voltage：DC 4.5~5.5V Input current：400mA
Dpad
Up/Down/Left/Right
Action button
ABXY L R LZ RZ
Option button
-
Start button
+
Left Joystick
L3
Press down joystick
Right Joystick
R3
Press down joystick
Capture
button
Capture·1
HOME button
HOME
Reset button
SYNC
Adapting
piece
SL SR
Secondary
button
Locking button