Users Manual

Adjust Turbo Speed
You can set the following buttons to Turbo Mode: A/B/X/Y/L/ZL/R/
ZR button
To Enable/Disable the manual and auto turbo speed function:
1. Turn on Turbo function
Pressing (at the same time) button plus the button you wish to
set to enable Turbo for that button.
2. To make the Turbo-enabled button automatic
Press (at the same time) button plus the button you previously
enabled.
3. Turn off Turbo function
Pressing (at the same time) button+ the button you previously
enabled as auto turbo to clear.
To Disable all buttons turbo speed function: Press the minus (-)
button and the down button of the direction pad at the same time.
How to increase the turbo speed:
When a button is Turbo enabled, hold for 5 seconds and press
up on the right analogue stick. This will increase on level of turbo
speed.
How to decrease the turbo speed:
When a button is Turbo enabled, hold for 5 seconds and press
down on the right analogue stick. This will increase on level of
turbo speed.
Adjust vibration Intensity
There are 4 levels of vibration intensity: 100%-70%-30%-0%
(No vibration). By default the controller is at 50% intensity.
How to increase the vibration intensity: Press the Plus (+) button
and the up button of direction pad at the same time for 3s, this will
increase one level of
vibration intensity.
How to decrease the vibration intensity: Press the Minus (-) button
Press button and the up button of direction pad at the same time
for 3s, this will decrease one level of vibration intensity.
ENG