User's Manual

hear a tone. The call will be transferred from your HEADSET to your mobile
device. You can repeat the step to transfer to call back to your HEADSET
9.TO MAKE VOICE CALLS:If the voice recognition function is turned on for
your device and it is connected to the speaker, you can make voice calls.
Here’s how:
1) Press “Vo+” and “Vo-“ button at the same time, you will hear a tone to
indicate that voice function has been activated.
2)Say clearly the name of the person you wish to call.
(dependent on individual phone device)
10.TO MAKE VOICE CALLS: Short press the MFB button to play or pause
music .
11. TO PLAY/ PAUSE MUSIC: Press PREV, play PREV song.
12.TO NEXT MUSIC:Press NEXT, play next song.
13. TO ADJUST VOLUME: Short press “Vo+”button to increase volume, and
you will hear an indication tone when increase to maximum volume. Similarly,
short press “Vo-“ button to decrease the volume, and also an indication tone
when decrease to minimum volume.
14.TO MUTE:While taking a phone call,press and hold “Vo-“ with 3 seconds
to mute your MIC,and you can repeat the operation to open the MIC.
15. After you have successfully connected with an Apple devices like iPhone
or iPad, you will see a small battery icon indicating the battery level of your
headset so you are always ready to party. (only applicable for selected Apple
devices)
Battery charging and low-voltage alert
When connected normally to charge, the red LED is on when charging and
Blue LED turns on when charging is complete. This takes 2-3 hours.
When the battery is running low, the alert tone sounds and the red LED flashes
twice every fifteen seconds.Charge as soon as possible or it will automatically
shut down.
Charging
Charging voltage:5V
Charging time: 2±0.5H
Voltage after complete charging:4.10～4.20V
Remarks
1) If headset stand by with paring mode for 5 min and without connection, It
will be exit paring mode automatically, also, the device will power off after
more 5 min..
2) Automatic re-connection can happen in the two cases:
a. If headset is turned off, it will connect to the pre-set device automatically
when turned on manually.
b. When headset disconnects from the device due to an exceeded effective