User's Manual

Transfer calls between headset and phone:
Press and hold the Volume up button for 3 seconds in the calling.
To Adjust Volume
Short press Volume up button to increase volume, you will hear an indication tone when
increase to maximum volume.
Short press Volume down button to decrease the volume, and also hear an indication tone
when decrease to minimum volume.
Siri or Voice Command
In the standby mode, press & hold the Multi Function button for 2 seconds to activate the
voice command function on Andriod or iOS devices. Refer to the phone manual for detailed
instruction if applicable.
Music Control
Play/Pause music: Briefly press MFB.
Play next/previous song: Long Press Volume up button /Long Press Volume down in the
music.
Multi-Point Connectivity
1. Disconnect headset from the first paired mobile phone by disable the Bluetooth function
on the mobile phone.And turn off the headset.
2.Turn on headset again and search on your second Bluetooth enabled device
and pair.
3． Enable the Bluetooth feature on the first paired Mobile phone. Headset will be connected
with both mobile phones now.
4． After first pairing with two mobile phones, headset will re-connect one mobile phone only
when it' s powered on，but you need to re-connect the second mobile phone manually.
While you are having a phone call with first mobile,and same time there is a incoming call
from second mobile.Double press multi function button to answer the second phone call and
hold the first one or long press multi function 2s to reject.
Double press multi function button to transfer between two mobiles phone call.