Use Manual

BTC26 USE MANUAL

Power On/Off：Slide to ON/OFF

Pairing Mode：Enter pairing mode automatically after power on with blue and red

led light flashing alternately

Answer/End a call：Press MFB once

Reject a call:Press and hold the MFB for 2 seconds

Redial:Double click the MFB

Mute：Press mute button once to Mute/Resume a call in the call

Siri or Voice Command：Press SIRI button once in the standby mode if your phone

support.

Volume Up：Press the Vo+ button once

Volume Down:Press the Vo- button once

Pause/Resume music:Press the MFB once

Next / Previous Track:Press and hold the volume + / - button for 2 seconds

Voice switching:Press and hold the volume + button for 2 seconds to switch between

BTC26 and your phone for talking

BUILT-INMOTION SENSOR for Auto Power On:

Start driving without delay as this Bluetooth hands-free car kit switches to Auto

Power and connects with your phone when car door is opened. If your parking is very

close to the house, the phone might still connect to your speakerphone when you

are at home. So please manually turn it off before leaving the car

PAGE 1
BTC26 USE MANUAL Power On/Off：Slide to ON/OFF Pairing Mode：Enter pairing mode automatically after power on with blue and red led light flashing alternately Answer/End a call：Press MFB once Reject a call:Press and hold the MFB for 2 seconds Redial:Double click the MFB Mute：Press mute button once to Mute/Resume a call in the call Siri or Voice Command：Press SIRI button once in the standby mode if your phone support.
PAGE 2
Simultaneously Pairing with Two Devices 1. First, follow the instructions in the ‘Pairing’ section to pair the BTC26 with Device 1 2. Once paired, disable pairing function on Device 1, the BTC26 will enter into pairing mode again. 3. Next, follow the instructions in the ‘Pairing’ section to pair with the Device 2 (Device 1 Pairing function Off). 4. Once paired with Device 2, reactive Bluetooth function on Device 1 and the BTC26 will automatically reconnect.