User's Manual

Connecting to the power source & Audio output
1. Plug the USB charging cable to the car charger adapter and plug the adapter into
the cigarette lighter socket of your vehicle.
2. Plug the auxiliary cable into the auxiliary port of the car audio system.
3. Turn on the car stereo and set the input source to AUX.
Switching On /Off
BTC115A Car Kit powers on and off along with the ignition of the car.
Press & hold the MFB for 3 seconds to turn BTC115A car kit on or off.
BTC115A Car Kit will automatically enter into pairing mode when power on, red and
blue LED light flashes alternately.
If the BTC115A car kit is disconnected with the paired mobile phone, it will enter into
pairing mode again. If no connection in 10 minutes, it will shut down automatically.
BTC115A Car Kit recognizes the previous paired device and will re-connect when it' s
powered on. To reset, press and hold both Previous Track and Next Track buttons
simultaneously for 5 seconds to enter into the pairing mode.
Pairing
1. Turn on the car kit to enter pairing mode automatically. The LED indicator will
flash in red and blue alternatively.
2. Activate the bluetooth feature on the mobile phone and set the media device to
'search for" or “add” new bluetooth devices.
3. Select " BTC115A" from the list of found devices to pair. If applicable. enter '0000'
as passkey.
4. LED indicator will turn to solid blue when connection is completed.
5. If pairing fails, remove the excessive unused Bluetooth devices from a list of paired
devices and re-start the pairing process from step l.
Siri or Voice Command
In the standby mode, press & hold the “Blue” button for 2 seconds to activate the