User's Manual

3. The speaker is now ready to use
Getting Started Guide
Two kinds of connections
1. Bluetooth wireless connection
2. 3.5mm audio cable connection
Connection indication
3.5mm audio cable connection
Plug one end of the 3.5mm audio cable into speaker audio AUX port on the speaker
and the other end into the device you want to connect.(such as mobile, MP3, ipad,
etc.)
LED indication status
Power on: Blue light flash 5 times
Power off: Red light flash 5 times.
Pairing: Blue and Red light flash quickly
Standby： Blue light flash 2 times every 7 seconds.
Incoming call： Blue light flash 1 times every 1 seconds
During a call： Blue light flash 1 times every 7 seconds
Charge: Red light remains on.
Charge finish: Red light turn to Blue.
Basic operation
1) Answer a call: After connection is successful, short press the MFB button to
answer an incoming call.you will hear an indication tone.
2) End a call: When the call is connected successfully , short press the MFB button
to hang up , with an indication tone.
3) Reject a call: Hold the MFB button for 3 seconds to reject an incoming call , you
will hear an indication tone.
4) Voice transfer: During a call , hold the MFB botton for 3 seconds until hear an
tone, then the voice begin to be transfered from the Bluetooth speaker to your
phone , the same operation can transfer the sound from your phone to a
Bluetooth speaker
5) Last number redial: In the standby mode , press the “Multi-function” button for 3
seconds will redial the last outgoing number. you will hear an indication tone.
6) Voice dial: In the standby mode, Double click the MFB button to start voice
dial,you will hear an indication tone.(Need the support of the mobile phone