User's Manual

42
• Please record all warnings matters.
• UMPC when not in a long time, the power supply should be switched off to avoid
transient overvoltage cause harm.
• Do not spill liquid on your UMPC, or they may result in fire or electrical short
circuit.
• For security reasons, portable UMPCs qualified service personnel should be
demolished, not cannibalizing its own.
• In the following situations, please review by qualified service personnel
Damaged cord or plug
Liquid into UMPC
UMPC humid and deformation
UMPC does not work properly or if you use manual inspection is still not
operational.
Falling UMPC damage
Significantly damaged UMPC
• Do not buy UMPCs in an inappropriate environment, such as the placement of its
perturbation 60 degrees above the high-temperature environments, will cause
damage.
• The UMPC's power supply to the wire with the use of qualified certification. That
the current is less than 6 amps, with more than three kilograms weight should be
used when no less than H05VV-F, the power line 0.75mm2.
• To avoid internal damage to the UMPC, in any internal components installed
equipment should be removed first socket and pull out the battery in the UMPC.
The UMPC is the sound pressure level is based on the specifications of the IEC
6070-1, which is equal to or less than 70 dB (A).
7.2 Clean UMPC
When needing to clean plastic casing and keyboard, use a soft cloth to clean
moderate slightly wetting agent, or sell the UMPC chairs above cleaning tools
clean.
Please do not use alcohol, petroleum-based solvents, or strong cleaning agents
to clean the PC. Not directly to the chassis, keyboard, screen or any is spraying
liquid. If the liquid crystals display (LCD) or fuzzy dust, please clean soft cloth to
James some moderate glass cleaning and gently cleans the glass, not to spray
liquid directly to the screen. In addition, please do not take a tissue to wipe display
screen in case scratches.