User's Manual

12
access to connect with any 100 VAC ~ 240V AC outlet. When you connect
transformer, if UMPC power is opened, all will be recharged.
Battery
Apart from the use of transformers, your UMPC batteries may also be used to
provide electricity. Battery use of the lithium-ion rechargeable (Li-Ion) batteries,
when fully charged battery, and use power management functions can provide
hours of UMPC power. When you use the supply of electricity transformers,
batteries should be Add to the UMPC to an external power supply interruption, as
a back-up power, and are available to recharge the battery, prevent battery from
aging.
2 Start using
The UMPC design focus on easy to set up and use. This
chapter will describe the installation steps to make your UMPC
normal operation to the extent possible, to accelerate the pace
of implementation. If the dealer has been pre-installed all the necessary drivers,
or an updated version of the driver, please contact dealers。
2.1 Battery
The UMPC is designed to use the power source of the following:
• Use the power transformer connected to the use of AC power socket.
• Use lithium batteries.
Please make full use of transformers, in the absence of AC power.
When you use the UMPC, rechargeable lithium-ion battery lets you in the absence
of an external power supply. When you connect transformers, rechargeable
batteries will start immediately. Generally the usage of lithium batteries is about
four hours.
To achieve the maximum capability of batteries, do not charge the battery before
the rechargeable battery to fully discharge. To complete battery discharge, please
remove transformer plugs, switch off the power management functions (in the
Windows Setup and configuration), and then turn on the power. When the battery
is fully discharge, please start charging plug transformer plugs.
If you do not fully discharge the battery, the battery will not be able to fully
charged.