User's Manual

Right-side function

• 1.USB port

Universal Serial Bus (USB) port on your UMPC connects to the USB peripheral

devices (such as printers, monitors, scanners, etc.).

• 2.DC Power Interface

Connect power adapter to supply continuous power supply and battery charger.

3. External VGA display interface

VIA/S3G Unichrome Pro II built-in chip can be connected with monitor or

projector, greater viewing area. You can use the show hotkey options at the same

time will be displayed in the LCD screen and the external screen displays, or

switching to just the display.

4. LAN ports

Then within 10 Base-T/100Base/TX LAN module, through the local area network

will be your UMPC and other UMPC, or network connections.

1.7 UMPC Bottom

UMPC bottom features

1. Driver District. 2. Battery slots 3. Memory slots

• Hard sepal area

Please replace the hard drive at this open area on the lid.

• Battery slots

Equipped with rechargeable Li-ion battery.

• Memory slots

Remove screws can see a DIMM slots, the factory has been stuck DDR2 DRAM

memory.

1.8 UMPC Accessories

Transformer

Transformer can provide an external power supply, and at the same time

recharging. This voltage transformer with automatic switching capability; It is